SeaQuest for Cooling Towers


SeaQuest is a unique blend of poly and otho phosphates certified by NSF


✔ lowers lead and cooper to below EPA mandated levels
✔ does not need any added pH control
✔ eliminates all negative effects of hardness
✔ stops discolored water
✔ lowers THM’s and HAA by reducing required chlorine levels
✔ removes pre-existing scale and corrosion deposits
✔ without negatively effecting water quality
✔ prevents formation of scale and corrosion deposits

Categories: ,


MSSG provides high quality water treatment, cleansing, repairs and preventive maintenance for cooling towers in which water hardness builds up scaling and corrosion along with fungi and algae causing an inefficient operation and a higher consumption of power and water.

SeaQuest controls corrosion without adding a layer of scale, the dose (and total cost of use) required is typically much less than all other corrosion control methods. Thus, the system can be operated at its natural pH, the cost of pH adjusting chemicals can be eliminated. Because using SeaQuest keeps the system clean, while operating at a natural pH, the amount of chlorine required is much less.

Typical methods of corrosion control involve building scale on the inside of the pipe wall, which needs an elevated pH and a high dose of chemical. This approach can often lead to inadequate corrosion control, which results in releasing metal into the water, reacting with chlorine. Because of this, and because of the elevated pH, high volumes of chlorine are required.

While most of these chemicals seem inexpensive per pound, the overall effect is a very high cost of use.